# Makefile.in generated by automake 1.14.1 from Makefile.am.
  # Makefile.  Generated from Makefile.in by configure.
  
  # Copyright (C) 1994-2013 Free Software Foundation, Inc.
  
  # This Makefile.in is free software; the Free Software Foundation
  # gives unlimited permission to copy and/or distribute it,
  # with or without modifications, as long as this notice is preserved.
  
  # This program is distributed in the hope that it will be useful,
  # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  # PARTICULAR PURPOSE.
  
  
  
  am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  am__make_running_with_option = \
    case $${target_option-} in \
        ?) ;; \
        *) echo "am__make_running_with_option: internal error: invalid" \
                "target option '$${target_option-}' specified" >&2; \
           exit 1;; \
    esac; \
    has_opt=no; \
    sane_makeflags=$$MAKEFLAGS; \
    if $(am__is_gnu_make); then \
      sane_makeflags=$$MFLAGS; \
    else \
      case $$MAKEFLAGS in \
        *\\[\ \	]*) \
          bs=\\; \
          sane_makeflags=`printf '%s
  ' "$$MAKEFLAGS" \
            | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
      esac; \
    fi; \
    skip_next=no; \
    strip_trailopt () \
    { \
      flg=`printf '%s
  ' "$$flg" | sed "s/$$1.*$$//"`; \
    }; \
    for flg in $$sane_makeflags; do \
      test $$skip_next = yes && { skip_next=no; continue; }; \
      case $$flg in \
        *=*|--*) continue;; \
          -*I) strip_trailopt 'I'; skip_next=yes;; \
        -*I?*) strip_trailopt 'I';; \
          -*O) strip_trailopt 'O'; skip_next=yes;; \
        -*O?*) strip_trailopt 'O';; \
          -*l) strip_trailopt 'l'; skip_next=yes;; \
        -*l?*) strip_trailopt 'l';; \
        -[dEDm]) skip_next=yes;; \
        -[JT]) skip_next=yes;; \
      esac; \
      case $$flg in \
        *$$target_option*) has_opt=yes; break;; \
      esac; \
    done; \
    test $$has_opt = yes
  am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  pkgdatadir = $(datadir)/openfst
  pkgincludedir = $(includedir)/openfst
  pkglibdir = $(libdir)/openfst
  pkglibexecdir = $(libexecdir)/openfst
  am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  install_sh_DATA = $(install_sh) -c -m 644
  install_sh_PROGRAM = $(install_sh) -c
  install_sh_SCRIPT = $(install_sh) -c
  INSTALL_HEADER = $(INSTALL_DATA)
  transform = $(program_transform_name)
  NORMAL_INSTALL = :
  PRE_INSTALL = :
  POST_INSTALL = :
  NORMAL_UNINSTALL = :
  PRE_UNINSTALL = :
  POST_UNINSTALL = :
  build_triplet = x86_64-unknown-linux-gnu
  host_triplet = x86_64-unknown-linux-gnu
  subdir = .
  DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  	$(top_srcdir)/configure $(am__configure_deps) \
  	$(srcdir)/config.h.in \
  	$(top_srcdir)/src/include/fst/config.h.in AUTHORS COPYING \
  	INSTALL NEWS README ar-lib compile config.guess config.sub \
  	install-sh missing ltmain.sh
  ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  am__aclocal_m4_deps = $(top_srcdir)/m4/ac_python_devel.m4 \
  	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
  	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
  	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
  am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  	$(ACLOCAL_M4)
  am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
   configure.lineno config.status.lineno
  mkinstalldirs = $(install_sh) -d
  CONFIG_HEADER = config.h $(top_builddir)/src/include/fst/config.h
  CONFIG_CLEAN_FILES =
  CONFIG_CLEAN_VPATH_FILES =
  AM_V_P = $(am__v_P_$(V))
  am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
  am__v_P_0 = false
  am__v_P_1 = :
  AM_V_GEN = $(am__v_GEN_$(V))
  am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  am__v_GEN_0 = @echo "  GEN     " $@;
  am__v_GEN_1 = 
  AM_V_at = $(am__v_at_$(V))
  am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  am__v_at_0 = @
  am__v_at_1 = 
  SOURCES =
  DIST_SOURCES =
  RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
  	ctags-recursive dvi-recursive html-recursive info-recursive \
  	install-data-recursive install-dvi-recursive \
  	install-exec-recursive install-html-recursive \
  	install-info-recursive install-pdf-recursive \
  	install-ps-recursive install-recursive installcheck-recursive \
  	installdirs-recursive pdf-recursive ps-recursive \
  	tags-recursive uninstall-recursive
  am__can_run_installinfo = \
    case $$AM_UPDATE_INFO_DIR in \
      n|no|NO) false;; \
      *) (install-info --version) >/dev/null 2>&1;; \
    esac
  RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
    distclean-recursive maintainer-clean-recursive
  am__recursive_targets = \
    $(RECURSIVE_TARGETS) \
    $(RECURSIVE_CLEAN_TARGETS) \
    $(am__extra_recursive_targets)
  AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
  	cscope distdir dist dist-all distcheck
  am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
  	$(LISP)config.h.in
  # Read a list of newline-separated strings from the standard input,
  # and print each of them once, without duplicates.  Input order is
  # *not* preserved.
  am__uniquify_input = $(AWK) '\
    BEGIN { nonempty = 0; } \
    { items[$$0] = 1; nonempty = 1; } \
    END { if (nonempty) { for (i in items) print i; }; } \
  '
  # Make sure the list of sources is unique.  This is necessary because,
  # e.g., the same source file might be shared among _SOURCES variables
  # for different programs/libraries.
  am__define_uniq_tagged_files = \
    list='$(am__tagged_files)'; \
    unique=`for i in $$list; do \
      if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
    done | $(am__uniquify_input)`
  ETAGS = etags
  CTAGS = ctags
  CSCOPE = cscope
  DIST_SUBDIRS = $(SUBDIRS)
  DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  distdir = $(PACKAGE)-$(VERSION)
  top_distdir = $(distdir)
  am__remove_distdir = \
    if test -d "$(distdir)"; then \
      find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
        && rm -rf "$(distdir)" \
        || { sleep 5 && rm -rf "$(distdir)"; }; \
    else :; fi
  am__post_remove_distdir = $(am__remove_distdir)
  am__relativize = \
    dir0=`pwd`; \
    sed_first='s,^\([^/]*\)/.*$$,\1,'; \
    sed_rest='s,^[^/]*/*,,'; \
    sed_last='s,^.*/\([^/]*\)$$,\1,'; \
    sed_butlast='s,/*[^/]*$$,,'; \
    while test -n "$$dir1"; do \
      first=`echo "$$dir1" | sed -e "$$sed_first"`; \
      if test "$$first" != "."; then \
        if test "$$first" = ".."; then \
          dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
          dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
        else \
          first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
          if test "$$first2" = "$$first"; then \
            dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
          else \
            dir2="../$$dir2"; \
          fi; \
          dir0="$$dir0"/"$$first"; \
        fi; \
      fi; \
      dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
    done; \
    reldir="$$dir2"
  DIST_ARCHIVES = $(distdir).tar.gz
  GZIP_ENV = --best
  DIST_TARGETS = dist-gzip
  distuninstallcheck_listfiles = find . -type f -print
  am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
    | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
  distcleancheck_listfiles = find . -type f -print
  ACLOCAL = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/missing aclocal-1.14
  AMTAR = $${TAR-tar}
  AM_DEFAULT_VERBOSITY = 1
  AR = ar
  AUTOCONF = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/missing autoconf
  AUTOHEADER = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/missing autoheader
  AUTOMAKE = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/missing automake-1.14
  AWK = gawk
  CC = gcc
  CCDEPMODE = depmode=gcc3
  CFLAGS = -g -O2
  CPP = gcc -E
  CPPFLAGS =  -fno-exceptions -funsigned-char
  CXX = g++
  CXXCPP = g++ -E
  CXXDEPMODE = depmode=gcc3
  CXXFLAGS =   -std=c++11
  CYGPATH_W = echo
  DEFS = -DHAVE_CONFIG_H
  DEPDIR = .deps
  DLLTOOL = false
  DL_LIBS = -ldl
  DSYMUTIL = 
  DUMPBIN = 
  ECHO_C = 
  ECHO_N = -n
  ECHO_T = 
  EGREP = /bin/grep -E
  EXEEXT = 
  FGREP = /bin/grep -F
  GREP = /bin/grep
  INSTALL = /usr/bin/install -c
  INSTALL_DATA = ${INSTALL} -m 644
  INSTALL_PROGRAM = ${INSTALL}
  INSTALL_SCRIPT = ${INSTALL}
  INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
  LD = /usr/bin/ld -m elf_x86_64
  LDFLAGS = 
  LIBOBJS = 
  LIBS = -ldl
  LIBTOOL = $(SHELL) $(top_builddir)/libtool
  LIPO = 
  LN_S = ln -s
  LTLIBOBJS = 
  MAKEINFO = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/missing makeinfo
  MANIFEST_TOOL = :
  MKDIR_P = /bin/mkdir -p
  NM = /usr/bin/nm -B
  NMEDIT = 
  OBJDUMP = objdump
  OBJEXT = o
  OTOOL = 
  OTOOL64 = 
  PACKAGE = openfst
  PACKAGE_BUGREPORT = help@www.openfst.org
  PACKAGE_NAME = OpenFst
  PACKAGE_STRING = OpenFst 1.6.7
  PACKAGE_TARNAME = openfst
  PACKAGE_URL = 
  PACKAGE_VERSION = 1.6.7
  PATH_SEPARATOR = :
  PYTHON = 
  PYTHON_CPPFLAGS = 
  PYTHON_EXEC_PREFIX = 
  PYTHON_EXTRA_LDFLAGS = 
  PYTHON_EXTRA_LIBS = 
  PYTHON_LDFLAGS = 
  PYTHON_PLATFORM = 
  PYTHON_PREFIX = 
  PYTHON_SITE_PKG = 
  PYTHON_VERSION = 
  RANLIB = ranlib
  SED = /bin/sed
  SET_MAKE = 
  SHELL = /bin/bash
  STRIP = strip
  VERSION = 1.6.7
  abs_builddir = /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7
  abs_srcdir = /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7
  abs_top_builddir = /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7
  abs_top_srcdir = /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7
  ac_ct_AR = ar
  ac_ct_CC = gcc
  ac_ct_CXX = 
  ac_ct_DUMPBIN = 
  am__include = include
  am__leading_dot = .
  am__quote = 
  am__tar = $${TAR-tar} chof - "$$tardir"
  am__untar = $${TAR-tar} xf -
  bindir = ${exec_prefix}/bin
  build = x86_64-unknown-linux-gnu
  build_alias = 
  build_cpu = x86_64
  build_os = linux-gnu
  build_vendor = unknown
  builddir = .
  datadir = ${datarootdir}
  datarootdir = ${prefix}/share
  docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
  dvidir = ${docdir}
  exec_prefix = ${prefix}
  host = x86_64-unknown-linux-gnu
  host_alias = 
  host_cpu = x86_64
  host_os = linux-gnu
  host_vendor = unknown
  htmldir = ${docdir}
  includedir = ${prefix}/include
  infodir = ${datarootdir}/info
  install_sh = ${SHELL} /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7/install-sh
  libdir = ${exec_prefix}/lib
  libexecdir = ${exec_prefix}/libexec
  libfstdir = ${exec_prefix}/lib/fst
  localedir = ${datarootdir}/locale
  localstatedir = ${prefix}/var
  mandir = ${datarootdir}/man
  mkdir_p = $(MKDIR_P)
  oldincludedir = /usr/include
  pdfdir = ${docdir}
  pkgpyexecdir = 
  pkgpythondir = 
  prefix = /local_disk/orion/ontrac/yannick/kaldi_20190717/kaldi/tools/openfst-1.6.7
  program_transform_name = s,x,x,
  psdir = ${docdir}
  pyexecdir = 
  pythondir = 
  sbindir = ${exec_prefix}/sbin
  sharedstatedir = ${prefix}/com
  srcdir = .
  sysconfdir = ${prefix}/etc
  target_alias = 
  top_build_prefix = 
  top_builddir = .
  top_srcdir = .
  SUBDIRS = src
  ACLOCAL_AMFLAGS = -I m4
  all: config.h
  	$(MAKE) $(AM_MAKEFLAGS) all-recursive
  
  .SUFFIXES:
  am--refresh: Makefile
  	@:
  $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
  	@for dep in $?; do \
  	  case '$(am__configure_deps)' in \
  	    *$$dep*) \
  	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
  	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
  		&& exit 0; \
  	      exit 1;; \
  	  esac; \
  	done; \
  	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
  	$(am__cd) $(top_srcdir) && \
  	  $(AUTOMAKE) --foreign Makefile
  .PRECIOUS: Makefile
  Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  	@case '$?' in \
  	  *config.status*) \
  	    echo ' $(SHELL) ./config.status'; \
  	    $(SHELL) ./config.status;; \
  	  *) \
  	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
  	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
  	esac;
  
  $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  	$(SHELL) ./config.status --recheck
  
  $(top_srcdir)/configure:  $(am__configure_deps)
  	$(am__cd) $(srcdir) && $(AUTOCONF)
  $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
  	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  $(am__aclocal_m4_deps):
  
  config.h: stamp-h1
  	@test -f $@ || rm -f stamp-h1
  	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
  
  stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
  	@rm -f stamp-h1
  	cd $(top_builddir) && $(SHELL) ./config.status config.h
  $(srcdir)/config.h.in:  $(am__configure_deps) 
  	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
  	rm -f stamp-h1
  	touch $@
  
  src/include/fst/config.h: src/include/fst/stamp-h2
  	@test -f $@ || rm -f src/include/fst/stamp-h2
  	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) src/include/fst/stamp-h2
  
  src/include/fst/stamp-h2: $(top_srcdir)/src/include/fst/config.h.in $(top_builddir)/config.status
  	@rm -f src/include/fst/stamp-h2
  	cd $(top_builddir) && $(SHELL) ./config.status src/include/fst/config.h
  
  distclean-hdr:
  	-rm -f config.h stamp-h1 src/include/fst/config.h src/include/fst/stamp-h2
  
  mostlyclean-libtool:
  	-rm -f *.lo
  
  clean-libtool:
  	-rm -rf .libs _libs
  
  distclean-libtool:
  	-rm -f libtool config.lt
  
  # This directory's subdirectories are mostly independent; you can cd
  # into them and run 'make' without going through this Makefile.
  # To change the values of 'make' variables: instead of editing Makefiles,
  # (1) if the variable is set in 'config.status', edit 'config.status'
  #     (which will cause the Makefiles to be regenerated when you run 'make');
  # (2) otherwise, pass the desired values on the 'make' command line.
  $(am__recursive_targets):
  	@fail=; \
  	if $(am__make_keepgoing); then \
  	  failcom='fail=yes'; \
  	else \
  	  failcom='exit 1'; \
  	fi; \
  	dot_seen=no; \
  	target=`echo $@ | sed s/-recursive//`; \
  	case "$@" in \
  	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  	  *) list='$(SUBDIRS)' ;; \
  	esac; \
  	for subdir in $$list; do \
  	  echo "Making $$target in $$subdir"; \
  	  if test "$$subdir" = "."; then \
  	    dot_seen=yes; \
  	    local_target="$$target-am"; \
  	  else \
  	    local_target="$$target"; \
  	  fi; \
  	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  	  || eval $$failcom; \
  	done; \
  	if test "$$dot_seen" = "no"; then \
  	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  	fi; test -z "$$fail"
  
  ID: $(am__tagged_files)
  	$(am__define_uniq_tagged_files); mkid -fID $$unique
  tags: tags-recursive
  TAGS: tags
  
  tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  	set x; \
  	here=`pwd`; \
  	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  	  include_option=--etags-include; \
  	  empty_fix=.; \
  	else \
  	  include_option=--include; \
  	  empty_fix=; \
  	fi; \
  	list='$(SUBDIRS)'; for subdir in $$list; do \
  	  if test "$$subdir" = .; then :; else \
  	    test ! -f $$subdir/TAGS || \
  	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  	  fi; \
  	done; \
  	$(am__define_uniq_tagged_files); \
  	shift; \
  	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  	  test -n "$$unique" || unique=$$empty_fix; \
  	  if test $$# -gt 0; then \
  	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  	      "$$@" $$unique; \
  	  else \
  	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  	      $$unique; \
  	  fi; \
  	fi
  ctags: ctags-recursive
  
  CTAGS: ctags
  ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  	$(am__define_uniq_tagged_files); \
  	test -z "$(CTAGS_ARGS)$$unique" \
  	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  	     $$unique
  
  GTAGS:
  	here=`$(am__cd) $(top_builddir) && pwd` \
  	  && $(am__cd) $(top_srcdir) \
  	  && gtags -i $(GTAGS_ARGS) "$$here"
  cscope: cscope.files
  	test ! -s cscope.files \
  	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
  clean-cscope:
  	-rm -f cscope.files
  cscope.files: clean-cscope cscopelist
  cscopelist: cscopelist-recursive
  
  cscopelist-am: $(am__tagged_files)
  	list='$(am__tagged_files)'; \
  	case "$(srcdir)" in \
  	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
  	  *) sdir=$(subdir)/$(srcdir) ;; \
  	esac; \
  	for i in $$list; do \
  	  if test -f "$$i"; then \
  	    echo "$(subdir)/$$i"; \
  	  else \
  	    echo "$$sdir/$$i"; \
  	  fi; \
  	done >> $(top_builddir)/cscope.files
  
  distclean-tags:
  	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
  
  distdir: $(DISTFILES)
  	$(am__remove_distdir)
  	test -d "$(distdir)" || mkdir "$(distdir)"
  	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  	list='$(DISTFILES)'; \
  	  dist_files=`for file in $$list; do echo $$file; done | \
  	  sed -e "s|^$$srcdirstrip/||;t" \
  	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  	case $$dist_files in \
  	  */*) $(MKDIR_P) `echo "$$dist_files" | \
  			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  			   sort -u` ;; \
  	esac; \
  	for file in $$dist_files; do \
  	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  	  if test -d $$d/$$file; then \
  	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  	    if test -d "$(distdir)/$$file"; then \
  	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  	    fi; \
  	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  	    fi; \
  	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  	  else \
  	    test -f "$(distdir)/$$file" \
  	    || cp -p $$d/$$file "$(distdir)/$$file" \
  	    || exit 1; \
  	  fi; \
  	done
  	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  	  if test "$$subdir" = .; then :; else \
  	    $(am__make_dryrun) \
  	      || test -d "$(distdir)/$$subdir" \
  	      || $(MKDIR_P) "$(distdir)/$$subdir" \
  	      || exit 1; \
  	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  	    $(am__relativize); \
  	    new_distdir=$$reldir; \
  	    dir1=$$subdir; dir2="$(top_distdir)"; \
  	    $(am__relativize); \
  	    new_top_distdir=$$reldir; \
  	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  	    ($(am__cd) $$subdir && \
  	      $(MAKE) $(AM_MAKEFLAGS) \
  	        top_distdir="$$new_top_distdir" \
  	        distdir="$$new_distdir" \
  		am__remove_distdir=: \
  		am__skip_length_check=: \
  		am__skip_mode_fix=: \
  	        distdir) \
  	      || exit 1; \
  	  fi; \
  	done
  	-test -n "$(am__skip_mode_fix)" \
  	|| find "$(distdir)" -type d ! -perm -755 \
  		-exec chmod u+rwx,go+rx {} \; -o \
  	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
  	|| chmod -R a+r "$(distdir)"
  dist-gzip: distdir
  	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
  	$(am__post_remove_distdir)
  
  dist-bzip2: distdir
  	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
  	$(am__post_remove_distdir)
  
  dist-lzip: distdir
  	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
  	$(am__post_remove_distdir)
  
  dist-xz: distdir
  	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
  	$(am__post_remove_distdir)
  
  dist-tarZ: distdir
  	@echo WARNING: "Support for shar distribution archives is" \
  	               "deprecated." >&2
  	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
  	$(am__post_remove_distdir)
  
  dist-shar: distdir
  	@echo WARNING: "Support for distribution archives compressed with" \
  		       "legacy program 'compress' is deprecated." >&2
  	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
  	$(am__post_remove_distdir)
  
  dist-zip: distdir
  	-rm -f $(distdir).zip
  	zip -rq $(distdir).zip $(distdir)
  	$(am__post_remove_distdir)
  
  dist dist-all:
  	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
  	$(am__post_remove_distdir)
  
  # This target untars the dist file and tries a VPATH configuration.  Then
  # it guarantees that the distribution is self-contained by making another
  # tarfile.
  distcheck: dist
  	case '$(DIST_ARCHIVES)' in \
  	*.tar.gz*) \
  	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
  	*.tar.bz2*) \
  	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
  	*.tar.lz*) \
  	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
  	*.tar.xz*) \
  	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
  	*.tar.Z*) \
  	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
  	*.shar.gz*) \
  	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
  	*.zip*) \
  	  unzip $(distdir).zip ;;\
  	esac
  	chmod -R a-w $(distdir)
  	chmod u+w $(distdir)
  	mkdir $(distdir)/_build $(distdir)/_inst
  	chmod a-w $(distdir)
  	test -d $(distdir)/_build || exit 0; \
  	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  	  && am__cwd=`pwd` \
  	  && $(am__cd) $(distdir)/_build \
  	  && ../configure \
  	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
  	    $(DISTCHECK_CONFIGURE_FLAGS) \
  	    --srcdir=.. --prefix="$$dc_install_base" \
  	  && $(MAKE) $(AM_MAKEFLAGS) \
  	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
  	  && $(MAKE) $(AM_MAKEFLAGS) check \
  	  && $(MAKE) $(AM_MAKEFLAGS) install \
  	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
  	        distuninstallcheck \
  	  && chmod -R a-w "$$dc_install_base" \
  	  && ({ \
  	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
  	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
  	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
  	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
  	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
  	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
  	  && rm -rf "$$dc_destdir" \
  	  && $(MAKE) $(AM_MAKEFLAGS) dist \
  	  && rm -rf $(DIST_ARCHIVES) \
  	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  	  && cd "$$am__cwd" \
  	  || exit 1
  	$(am__post_remove_distdir)
  	@(echo "$(distdir) archives ready for distribution: "; \
  	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
  distuninstallcheck:
  	@test -n '$(distuninstallcheck_dir)' || { \
  	  echo 'ERROR: trying to run $@ with an empty' \
  	       '$$(distuninstallcheck_dir)' >&2; \
  	  exit 1; \
  	}; \
  	$(am__cd) '$(distuninstallcheck_dir)' || { \
  	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  	  exit 1; \
  	}; \
  	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
  	   || { echo "ERROR: files left after uninstall:" ; \
  	        if test -n "$(DESTDIR)"; then \
  	          echo "  (check DESTDIR support)"; \
  	        fi ; \
  	        $(distuninstallcheck_listfiles) ; \
  	        exit 1; } >&2
  distcleancheck: distclean
  	@if test '$(srcdir)' = . ; then \
  	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  	  exit 1 ; \
  	fi
  	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  	  || { echo "ERROR: files left in build directory after distclean:" ; \
  	       $(distcleancheck_listfiles) ; \
  	       exit 1; } >&2
  check-am: all-am
  check: check-recursive
  all-am: Makefile config.h
  installdirs: installdirs-recursive
  installdirs-am:
  install: install-recursive
  install-exec: install-exec-recursive
  install-data: install-data-recursive
  uninstall: uninstall-recursive
  
  install-am: all-am
  	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  
  installcheck: installcheck-recursive
  install-strip:
  	if test -z '$(STRIP)'; then \
  	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  	      install; \
  	else \
  	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  	fi
  mostlyclean-generic:
  
  clean-generic:
  
  distclean-generic:
  	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
  	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
  
  maintainer-clean-generic:
  	@echo "This command is intended for maintainers to use"
  	@echo "it deletes files that may require special tools to rebuild."
  clean: clean-recursive
  
  clean-am: clean-generic clean-libtool mostlyclean-am
  
  distclean: distclean-recursive
  	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
  	-rm -f Makefile
  distclean-am: clean-am distclean-generic distclean-hdr \
  	distclean-libtool distclean-tags
  
  dvi: dvi-recursive
  
  dvi-am:
  
  html: html-recursive
  
  html-am:
  
  info: info-recursive
  
  info-am:
  
  install-data-am:
  
  install-dvi: install-dvi-recursive
  
  install-dvi-am:
  
  install-exec-am:
  
  install-html: install-html-recursive
  
  install-html-am:
  
  install-info: install-info-recursive
  
  install-info-am:
  
  install-man:
  
  install-pdf: install-pdf-recursive
  
  install-pdf-am:
  
  install-ps: install-ps-recursive
  
  install-ps-am:
  
  installcheck-am:
  
  maintainer-clean: maintainer-clean-recursive
  	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
  	-rm -rf $(top_srcdir)/autom4te.cache
  	-rm -f Makefile
  maintainer-clean-am: distclean-am maintainer-clean-generic
  
  mostlyclean: mostlyclean-recursive
  
  mostlyclean-am: mostlyclean-generic mostlyclean-libtool
  
  pdf: pdf-recursive
  
  pdf-am:
  
  ps: ps-recursive
  
  ps-am:
  
  uninstall-am:
  
  .MAKE: $(am__recursive_targets) all install-am install-strip
  
  .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
  	am--refresh check check-am clean clean-cscope clean-generic \
  	clean-libtool cscope cscopelist-am ctags ctags-am dist \
  	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
  	dist-xz dist-zip distcheck distclean distclean-generic \
  	distclean-hdr distclean-libtool distclean-tags distcleancheck \
  	distdir distuninstallcheck dvi dvi-am html html-am info \
  	info-am install install-am install-data install-data-am \
  	install-dvi install-dvi-am install-exec install-exec-am \
  	install-html install-html-am install-info install-info-am \
  	install-man install-pdf install-pdf-am install-ps \
  	install-ps-am install-strip installcheck installcheck-am \
  	installdirs installdirs-am maintainer-clean \
  	maintainer-clean-generic mostlyclean mostlyclean-generic \
  	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
  	uninstall-am
  
  
  # Tell versions [3.59,3.63) of GNU make to not export all variables.
  # Otherwise a system limit (for SysV at least) may be exceeded.
  .NOEXPORT: