#!/bin/bash
# Copyright    2017  Hossein Hadian

# This script does end2end chain training (i.e. from scratch)
# local/chain/compare_wer.sh exp/chain/e2e_cnn_1a/
# System                      e2e_cnn_1a (dict_50k)  e2e_cnn_1a (dict_50k + unk_model)
# WER                             15.21                  14.41
# CER                              7.43                   6.82
# WER val                         14.84                  13.51
# CER val                          6.41                   5.60
# Final train prob              -0.0206
# Final valid prob              -0.0393
# Final train prob (xent)
# Final valid prob (xent)
# Parameters                      9.52M

# steps/info/chain_dir_info.pl exp/chain/e2e_cnn_1a
# exp/chain/e2e_cnn_1a: num-iters=42 nj=2..4 num-params=9.5M dim=40->12640 combine=-0.020->-0.020 (over 1) logprob:train/valid[27,41,final]=(-0.025,-0.021,-0.021/-0.044,-0.040,-0.039)

set -e
stage=0
train_stage=-10
get_egs_stage=-10
affix=1a
nj=30

# training options
tdnn_dim=450
minibatch_size=150=100,64/300=50,32/600=25,16/1200=16,8
common_egs_dir=
train_set=train
decode_val=true
lang_decode=data/lang_unk
if $decode_val; then maybe_val=val; else maybe_val= ; fi
# End configuration section.
echo "$0 $@"  # Print the command line for logging

. ./cmd.sh
. ./path.sh
. ./utils/parse_options.sh

if ! cuda-compiled; then
  cat <<EOF && exit 1
This script is intended to be used with GPUs but you have not compiled Kaldi with CUDA
If you want to use GPUs (and have them), go to src/, and configure and make on a machine
where "nvcc" is installed.
EOF
fi

lang=data/lang_e2e
treedir=exp/chain/e2e_bitree  # it's actually just a trivial tree (no tree building)
dir=exp/chain/e2e_cnn_${affix}

if [ $stage -le 0 ]; then
  # Create a version of the lang/ directory that has one state per phone in the
  # topo file. [note, it really has two states.. the first one is only repeated
  # once, the second one has zero or more repeats.]
  rm -rf $lang
  cp -r data/lang $lang
  silphonelist=$(cat $lang/phones/silence.csl) || exit 1;
  nonsilphonelist=$(cat $lang/phones/nonsilence.csl) || exit 1;
  # Use our special topology... note that later on may have to tune this
  # topology.
  steps/nnet3/chain/gen_topo.py $nonsilphonelist $silphonelist >$lang/topo
fi

if [ $stage -le 1 ]; then
  steps/nnet3/chain/e2e/prepare_e2e.sh --nj 30 --cmd "$cmd" \
                                       --shared-phones true \
                                       --type biphone \
                                       data/$train_set $lang $treedir
  $cmd $treedir/log/make_phone_lm.log \
  cat data/$train_set/text \| \
    steps/nnet3/chain/e2e/text_to_phones.py data/lang \| \
    utils/sym2int.pl -f 2- data/lang/phones.txt \| \
    chain-est-phone-lm --num-extra-lm-states=500 \
                       ark:- $treedir/phone_lm.fst
fi

if [ $stage -le 2 ]; then
  echo "$0: creating neural net configs using the xconfig parser";
  num_targets=$(tree-info $treedir/tree | grep num-pdfs | awk '{print $2}')
  common1="height-offsets=-2,-1,0,1,2 num-filters-out=36"
  common2="height-offsets=-2,-1,0,1,2 num-filters-out=70"
  mkdir -p $dir/configs
  cat <<EOF > $dir/configs/network.xconfig
  input dim=40 name=input
  conv-relu-batchnorm-layer name=cnn1 height-in=40 height-out=40 time-offsets=-3,-2,-1,0,1,2,3 $common1
  conv-relu-batchnorm-layer name=cnn2 height-in=40 height-out=20 time-offsets=-2,-1,0,1,2 $common1 height-subsample-out=2
  conv-relu-batchnorm-layer name=cnn3 height-in=20 height-out=20 time-offsets=-4,-2,0,2,4 $common2
  conv-relu-batchnorm-layer name=cnn4 height-in=20 height-out=10 time-offsets=-4,-2,0,2,4 $common2 height-subsample-out=2
  relu-batchnorm-layer name=tdnn1 input=Append(-4,-2,0,2,4) dim=$tdnn_dim
  relu-batchnorm-layer name=tdnn2 input=Append(-4,0,4) dim=$tdnn_dim
  relu-batchnorm-layer name=tdnn3 input=Append(-4,0,4) dim=$tdnn_dim
  relu-batchnorm-layer name=tdnn4 input=Append(-4,0,4) dim=$tdnn_dim
  ## adding the layers for chain branch
  relu-batchnorm-layer name=prefinal-chain dim=$tdnn_dim target-rms=0.5 $output_opts
  output-layer name=output include-log-softmax=false dim=$num_targets max-change=1.5 $output_opts
EOF
  steps/nnet3/xconfig_to_configs.py --xconfig-file $dir/configs/network.xconfig --config-dir $dir/configs
fi

if [ $stage -le 3 ]; then
  # no need to store the egs in a shared storage because we always
  # remove them. Anyway, it takes only 5 minutes to generate them.
  steps/nnet3/chain/e2e/train_e2e.py --stage $train_stage \
    --cmd "$cmd" \
    --feat.cmvn-opts="--norm-means=false --norm-vars=false" \
    --chain.leaky-hmm-coefficient 0.1 \
    --chain.l2-regularize 0.00005 \
    --chain.apply-deriv-weights false \
    --egs.dir "$common_egs_dir" \
    --egs.stage $get_egs_stage \
    --egs.opts "--num_egs_diagnostic 100 --num_utts_subset 400" \
    --chain.frame-subsampling-factor 4 \
    --chain.alignment-subsampling-factor 4 \
    --trainer.num-chunk-per-minibatch $minibatch_size \
    --trainer.frames-per-iter 1000000 \
    --trainer.num-epochs 4 \
    --trainer.optimization.momentum 0 \
    --trainer.optimization.num-jobs-initial 2 \
    --trainer.optimization.num-jobs-final 4 \
    --trainer.optimization.initial-effective-lrate 0.001 \
    --trainer.optimization.final-effective-lrate 0.0001 \
    --trainer.optimization.shrink-value 1.0 \
    --trainer.max-param-change 2.0 \
    --cleanup.remove-egs true \
    --feat-dir data/$train_set \
    --tree-dir $treedir \
    --dir $dir  || exit 1;
fi

if [ $stage -le 4 ]; then
  # The reason we are using data/lang here, instead of $lang, is just to
  # emphasize that it's not actually important to give mkgraph.sh the
  # lang directory with the matched topology (since it gets the
  # topology file from the model).  So you could give it a different
  # lang directory, one that contained a wordlist and LM of your choice,
  # as long as phones.txt was compatible.
  utils/mkgraph.sh \
    --self-loop-scale 1.0 $lang_decode \
    $dir $dir/graph || exit 1;
fi

if [ $stage -le 5 ]; then
  for decode_set in test $maybe_val; do
    steps/nnet3/decode.sh --acwt 1.0 --post-decode-acwt 10.0 \
      --nj $nj --cmd "$cmd" \
      $dir/graph data/$decode_set $dir/decode_$decode_set || exit 1;
  done
fi

echo "$0 Done. Date: $(date). Results:"
local/chain/compare_wer.sh $dir